From point cloud to existing-situation plan: how it works

A laser scan captures a building in millions or points. But a permit file, a renovation design or a pre-cadastral file needs clean 2D plans. This is how we turn your point cloud into an existing-situation plan.

1. What you send

A registered point cloud, for example as .e57 or .rcp, with the reference information and your template or title block. Large files are shared through a link. Photos and field sketches help with details the scan does not capture well.

2. Slicing and drawing

In PointCab Origins we create horizontal slices per floor and vertical slices for sections and elevations. On top or these we draw walls, openings, levels and stairs in BricsCAD, directly on the scan. Where a slice is not enough, we check details in TruView.

3. Checking against the scan

Every floor is checked against the point cloud before the plan goes out. That way dimensions, thicknesses and levels match what was actually measured.

4. What you get back

Floor plans, sections, elevations, terrain section and site plan, in DWG, DXF and PDF, on your template and under your name if you want. See an example from a 60 GB scan or read how we work with surveyors.

More from the knowledge base